so you can extend it in Windows 10 and 11

When we buy a new piece of equipment, such as a computer, we all want it to last us as long as possible to avoid having to make a new investment in it. In the case of PCs, it is really important to take care of each of its components, being one of the most important the SSD storage unit which has a considerable price and is essential to store the operating system or other files.

By reading and writing new files, the SSD can wear out over time. But the good thing is that with the appropriate optimization measures This unit can perfectly last up to 10 years. In this article we will tell you the main tips to extend its life and improve the performance of the PC, by containing the basic files for its operation.

Avoid automatic defragmentation

One of the most classic functions that you have surely heard about storage units is defragmentation. For a long time we all had this word in our mouths to be able to speed up storage drive search, but this was advice that could be applied to mechanical units. Now with SSDs this is not necessary.

This is mainly due to the fact that the operation of SSDs means that it is not necessary to have the information organized as there are no moving parts. Everything it contains has fast and efficient accessibility, so the having automatic defragmentation active is a mistake if it’s not a mechanical drive. The only thing that would be achieved is precisely wearing down the hardware unnecessarily.

The steps to check if active defragmentation is active or not are as follows:

  • In the Windows search engine type the term Defragment.

  • Among the results that appear, click on Defragment and optimize drives.

  • In the list select the SSD drive, and at the bottom you will see if the optimization is scheduled or not. If it is activated, click on change settings.

  • Uncheck the option scheduled run


Activate the TRIM function

One of the most interesting functions in Windows in relation to SSDs, which is an optimizer and is activated when deleting some type of data from the unit. Specific, This utility will report the blocks with stored data that can be deleted. Numerous deletions will not be done in this way, but only one will be done, avoiding excessive readings and loss of performance.

This feature obviously extends the life of an SSD, but it also improves the performance of the computer. Natively Windows when detecting an SSD drive automatically activates TRIM. In order to verify that it is running, you simply have to run the command prompt as administrator and enter the command fsutil behavior query DisableDeleteNotify.


In the result you should look for the NTFS value DisableDeleteNotify that must be accompanied by a 0, which will indicate that TRIM is active. But in the event that a 1 appears, you will have to force it to start by running PowerShell and entering the command Optimize-Volume -DriveLetter C -ReTrim -Verbose changing the letter C to that of the SSD drive.

Don’t abuse performance tests

In order to be able to know the status of the SSD or make the corresponding review, there are many programs that report the speed of reading and writing. But this is something that should not be overused, and take it as a habit every day check the speed of the storage to see its degradation is not the best. On some occasions it can be assimilated to consulting the health of the battery on our mobile devices.

7 free tools to check the health of your hard drive

But it is a practice that cannot be recommended, since these programs that check the speed carry out different consumption tests, forcing the storage units to the maximum. This ends up consuming multiple write cycleswhich if it is done on a recurring basis seriously affects the useful life of the SSD.

Do not index SSDs

Surely on many occasions you have heard that it is advisable to index the storage unit from time to time to improve its performance. This is mainly because allows the system to know where each file is stored and makes it appear much faster when searching for it and without spending a long time waiting for it to track all the documents.

But this advice It is something that could be applied to mechanical discs where it was useful because they have a much slower reading speed. But on SSD drives this does not make any sense and means that if you are indexing all your information you are consuming cycles that are very valuable in the long run.

In this way, we recommend that in both Windows 10 and 11 you deactivate this feature to increase the useful life of the disk. This can be achieved by following these steps:

  1. Access the File Explorer.

  2. In the left part of the window click on your team.

  3. Right-click on your SSD drive.

  4. In the drop down menu select Properties.

  5. On the General tab, uncheck the option that says Allow files on this drive to have content indexed in addition to file properties.


Disable Windows hibernation

We have all hibernated the computer at some time, to be able to have it in a state in which with a simple click of the mouse it can be started and start working with it, when your desktop is displayed as you had left it. But this is not something that happens by magic, rather the system takes a ‘photograph’ of the programs you have running so that they are quickly back there when you restart your PC.

This photograph is about a file that is similar in size to the RAM memory that you have installed on your device. This file is written to the SSD drive when the device is hibernated and will be read when the device is turned on again. In this way, to extend the useful life of the SSD, it is advisable to disable the possibility of the PC entering a state of hibernation to avoid wear on the physical unit.

If you have boot problems in Windows 10 and 11, this option can help you solve them: how to activate 'Fast Startup'

And it is that sometimes this mode is activated without you realizing it, since you leave the computer alone for 5-10 minutes and this mode is activated. we particularly We recommend you deactivate it, and put the computer into hibernation at specific times and when it is really necessary. To do this you will have to follow these steps:

  • Click Start.

  • In the search engine type ‘cmd’

  • Right-click on the result Symbol of the system and run it as administrator.

  • In the console enter the command powercfg -h off and press Enter.